Rivet Shelving is an economical storage system
that provides exceptional value and versatility. Accommodating
applications from light to heavy duty, this system is easy to assemble
and expandable as needs change.
Single Rivet Shelving
Single Rivet shelving is built using double rivet beams
on the bottom and top levels, this gives the unit its
rigidity, and single rivet beam on all intermediate
levels to maximize the vertical storage opening.
Double Rivet Shelving
Similar to Single Rivet Shelving, Double Rivet
shelving is built using all double rivet beams. This
system is designed for spans of 48”-96” or when
increased capacity is needed. Use Double Rivet
channels beams on intermediate and top levels
for maximum capacity.
Rivet Components
Angle Post – 1 1/2” x 1 1/2”
(Standard Duty)
Used as upright post for standard rivet units.
Angle Post – 1 7/8” x 1 7/8”
(Heavy Duty)
The heavy duty angle post is recommended
when maximum capacity and stability are
necessary. Ideally suited for two level shelving,
storage deck and high rise shelving applications.
Single Rivet Shelf Beam
(Standard Duty)
Primarily used as an intermediate shelf
support when maximum vertical space
between levels is needed. Furnished as
standard on High Density Shelving units.
Single Rivet Shelf Beam
(Heavy Duty)
Manufactured to provide maximum capacity
with very little loss of usable vertical space
between shelves.
Double Rivet Angle Beam
(Standard Duty)
Used to establish unit stability and to provide
shelf support on all four sides.
Double Rivet Angle Beam
(Heavy Duty)
Provides stability and increased load capacity
in the longer lengths.
Double Rivet Channel Beam
Designed to provide maximum left to right
stability and higher capacity than standard
or heavy duty beams. Cannot be used
at floor level.
Center Support
Used with double rivet beams to provide
front-to-rear support for shelf deck and
provides added stability to beams.
Tie Plate
Used to join Angle Post units side by side
to insure proper row alignment.
